15
Student desks
Teacher’s desk and
computer
White board
Top view of an example classroom
Windows
A good place for the receiver
You’ll install the receiver
near potential audio
sources and the teaching
computer according to
the placement instructions
on page 4
Windows
Plan your installation (Speakers)
Estimated time for this step: 5-10 minutes
Your classroom is ready and you’ve organized all the parts and tools you’ll need to set up your classroom
amplification system. Now it’s time to decide where you’ll place major components. To help you decide,
we’ll use the following layout of a typical classroom as an example:
1. Decide where to put the Tower
We recommend locating the Tower near the majority of your potential audio sources — DVD player, computer,
and the teaching computer. This will make it easier to connect cables, and there are probably convenient
power sources near these as well. Follow system integration guidelines on page 2.
To Next Page
Loading...