35
Appendix A: Teacher's Tips
Start of Day
1. Put microphone around your neck and adjust the strap so it is comfortable and 14cm/5.5in from your mouth.
2. Press the One-Touch Button on your Pendant Microphone. This will wake up both your Microphone and Tower.
3. Speak in a normal conversational tone.
4. To adjust volume using voice command:
1. Press and hold the One-Touch Button on the Pendant Microphone.
2. Wait for Voice Command tone and Tower LCD background to turn green.
3. Keeping the button pressed, say “Increase” or “Reduce”.
4. Wait for confirmation tone and Tower LCD background to return to white.
5. Release button.
OR
Use Tower LCD touchscreen to adjust volume.
End of Day
1. Your Juno Tower and Microphones will automatically go into standby mode after a period of inactivity (10 minutes
for microphones; 30 minutes for tower).
2. Charge your microphones in the charging cradle (optional) or connect them with the USB cable to your Juno
Tower or your computer.
Mute Indicator
OFF ....................Un-muted
SOLID RED .................Muted
Power Indicator
SOLID GREEN............Power On
OFF ..................... Standby
Battery Indicator
In Use
OFF ..............Battery Charged
FLASHING RED ........Battery Low
When Charging
SOLID RED ...............Charging
SOLID GREEN........ Fully Charged
Auxilliary Audio Input
Charging/Programming Jack
For configuration or charging
One-Touch Button
PRESS MOMENTARILY ...Awaken/Mute/Unmute
PRESS AND HOLD....... Issue Voice Command
To Next Page
Loading...
Need help?
General