Jupiter AX411 Access Point User Manual

Related
Documentation
AX411 Access Point Description on page 3•
• AX411 Access Point Physical Specifications on page 6
• AX411 Access Point Front Panel and LEDs on page 9
• AX411 Access Point Rear Panel on page 10
AX411 Access Point Physical Specifications
Table 4 on page 6 lists the physical specifications of the AX411 Access Point.
Table 4: AX411 Access Point Specifications
ValueSpecification
•
1.75 in. (44.4 mm) excluding antennas
•
5.9 in. (150 mm) with supplied antennas
Height
9.5 in. (241 mm)Width
•
6.3 in. (160 mm) excluding antennas
•
7.4 in. (188 mm) with supplied antennas
Depth
2.33 lb (1.05 kg) with supplied antennasWeight
No performance degradation up to 10,000 ft (3048
m)
Altitude
Normal operation ensured in temperature range of
32°F (0°C) to 122°F (50°C)
Nonoperating storage temperature in shipping
container: –40°F (–40°C) to 158°F (70°C)
Temperature
12.4 watts (1.03 amps at 12 VDC) from optional power
supply or 12.4 watts from PoE
Maximum input power
42.3 BTUMaximum thermal output
NOTE: These specifications are
estimates and subject to change.
70 dB(A) or less per EN ISO 7779Noise level
CAUTION: Beforeremoving or installingcomponentsof a functioningaccess
point, attach an electrostatic discharge (ESD) strap to an ESD point and
place the other end of the strap around your bare wrist. Failure to use an ESD
strap could result in damage to the access point.
Copyright © 2012, Juniper Networks, Inc.6
AX411 Access Point Hardware Guide

Jupiter AX411 Access Point Specifications

General

Brand	Jupiter
Model	AX411 Access Point
Category	Wireless Access Point
Language	English