1-14 (No.MB563)
3.1.5 Removing the tuner
(See Figs.13 and 14)
• Remove the side panel L, side panel R, top cover, front base
and audio board.
(1) From the top side of the main body, disconnect the card
wire from the connector CN441
on the main board. (See
Fig.13)
(2) From the back side of the main body, remove the two
screws J attaching the tuner to the rear panel and then take
out the tuner. (See Fig.14)
Fig.13
Fig.14
Tune
CN441Main board
J
Rear panel