JVC DD-8E - Removing the Power Transformer; See Fig.

1-24 (No.MB563)
3.2.4 Removing the Power transformer
(See Fig.8, 9)
(1) Disconnect the connector wires from Power transformer
connected to connector CN102 of the Control board as-
sembly and CN302 of the AMP board assembly. (See
Fig.8)
(2) Remove the four screws K attaching the Power transform-
er. (See Fig.9)
Fig.8
Fig.9
CN302 CN102
Control board
asembly
AMP board assembly
K