JVC Everio GZ-EX210 - Setting the Detection Method of this Camera (DETECT;MAIL SETTING); Setting the Detection Interval of this Camera (DETECT;MAIL SETTING)

Setting the Detection Method of this Camera (DETECT/MAIL
SETTING)
Sets the detection method to start recording.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
MENU
3
Tap “DETECT/MAIL SETTING”.
(Operation on this camera)
.
DETECT/MAIL SETTING
Wi-Fi
4
Tap “DETECTION METHOD”.
(Operation on this camera)
.
DETECTION METHOD
DETECT/MAIL SETTING
0
Tap “MOTION DETECTION” or “FACE DETECTION”.
0
Select “MOTION DETECTION” to start recording upon detection of
subject’s movements.
0
Select “FACE DETECTION” to start recording upon detection of
human faces.
Setting the Detection Interval of this Camera (DETECT/MAIL
SETTING)
Sets the time period to enable detection again after the previous one.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
MENU
3
Tap “DETECT/MAIL SETTING”.
(Operation on this camera)
.
DETECT/MAIL SETTING
Wi-Fi
4
Tap “DETECTION INTERVAL”.
(Operation on this camera)
.
DETECT/MAIL SETTING
DETECTION INTERVAL
0
Set
the interval to perform detection. By default, it is set to 10 minutes.
Using Wi-Fi
34