Adjusting Focus Manually
Set this when the focus is not clear in Intelligent Auto or when manual
focusing is desired.
1
Select the Manual recording mode.
.
0
If the mode is P Intelligent Auto, tap P on the recording screen
to display the mode switching screen.
Tap H to switch the recording mode to Manual.
.
0
The shortcut menu appears.
3
Tap “MENU” in the shortcut menu.
.
0
Tap 3 or 2 to move upward or downward for more selection.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “MANUAL”.
.
0
Tap E to focus on a distant subject.
If E appears blinking, focus cannot be set any further.
0
Tap p to focus on a near subject.
If p appears blinking, focus cannot be set any nearer.
7
Tap “SET” to confirm.
.
0
When
focus is confirmed, the focusing frame disappears and E and
p are displayed.
Memo :
0
A subject that is focused at the telephoto (T) end remains in focus when
it is zoomed out to the wide angle (W) end.
Recording
83
To Next Page
Loading...
Need help?
General