JVC EX-A3

Timer
48
Set the clock beforehand. (Refer to page 15.)
1 Press [CLOCK/TIMER].
• If you accidentally pressed [CLOCK/TIMER]
twice or more, press [CLOCK/TIMER]
repeatedly until the display shown above is
displayed.
2 Press [CLOCK/TIMER].
3 Set the starting time and ending
time with 2 or 3, and then press
[ENTER].
Example:
When setting the starting time to 8:45
When setting the ending time to 9:45
• Press 2 or 3 to select the value and press
[ENTER] to set the value.
• You can use the number buttons instead of
2 or 3.
4 Press 2 or 3 to select “ONCE” or
“WEEKLY”, and then press
[ENTER].
ONCE The playback timer works once.
WEEKLY The playback timer works weekly
or every day.
5 Press 2 or 3 to select the desired
day of the week, and then press
[ENTER].
• Each time you press 2 or 3, the display
changes as follows.
When “ONCE” is selected
When “WEEKLY” is selected
*1 The playback timer works every day.
*2 The playback timer works Monday to Saturday.
*3 The playback timer works Monday to Friday.
6 Press 2 or 3 to select the desired
source, and then press [ENTER].
• If you have selected “FM” or “AM” in this
step, press 2, 3 or the number buttons to
select the preset number of the radio station
whose broadcast you want to listen to, and
then press [ENTER].
7 Press 2 or 3 to adjust the play-
back volume, and then press
[ENTER].
• You can use the number buttons to specify
the volume.
• The settings appear in the display window
on the main unit.
Using the playback timer
*1
*3*2
(Continued on the next page)
EX-A3[J_C]-09.fm Page 48 Thursday, February 1, 2007 1:56 PM