PLAYBACK MODE
62
Outputting Audio
Setting
Confirm that this device is in the VTR mode.
(VTR indicator: On)
Earphone terminal output audio
Audio output is as shown in the table below depending on
the MONITOR SELECT switch and AUDIO MONITOR
and PB AUDIO CH [DV] settings on the AUDIO menu
screen.
1. Display the AUDIO menu screen.
Select the AUDIO item on the TOP MENU screen.
2. Set the AUDIO menu screen.
• PB AUDIO CH [DV] Items
For HDV format, audio is output to CH1 and CH2 no matter
the settings.
3. Either of the following operations returns you to the nor-
mal screen.
• Press the STATUS button
or
• Return to the TOP MENU screen, select the EXIT item
and press the SHUTTER dial.
MEMO
The DV format is capable of recording up to 4 channels
when the 12-bit, 32 kHz sampling frequency is employed.
This device records audio on the two channels CH-1 and
CH-2. (4-channel recording is possible in the case of DV
input.)
When this device is used for playback of a tape that was
recorded on another unit with audio recorded on the CH-3
and CH-4 channels, the PB AUDIO CH [DV] item on the
AUDIO menu screen must be set.
After-recording on the CH-3 and CH-4 channels is not pos-
sible.
USER 3USER 2USER 1
STATUS
MENU
2
1
ND FILTER
REC
OFF
ON
POWER
WHT.BAL
AUTO
AUDIO
LEVEL
AUTO
CH-1 CH-2
VF BRIGHT
CH-2
CH-1
-
+
AUDIO SELECT
MANU
AUTO
TC
LCD BRIGHT
DISPLAY
TC
UB
FREE
REGEN
GENE.
REC
CAM/VTR
AUDIO menu screen
MONITOR
SELECT switch
VTR indicator
SHUTTER
dial
STATUS
button
CAM/VTR button
CH1/2 : To reproduce the sound (CH-1, CH-2)
recorded during shooting.
MIX : To reproduce the sound recorded during
shooting (CH-1, CH-2) and the after-
recorded sound (on CH-3 and CH-4)
simultaneously.
CH3/4 : To reproduce the sound after-recorded
on CH-3 and CH-4.
PB AUDIO CH [DV]
AUDIO OUT connector
CH-1 CH-2
CH1/2 CH1 CH2
MIX CH1+CH3 CH2+CH4
CH3/4 CH3 CH4
MONITOR
SELECT
PB AUDIO CH [DV]
AUDIO MONITOR
CH1/2 MIX CH3/4
CH-1 - L/R: CH1 L/R: CH1+CH3 L/R: CH3
BOTH MIX
STEREO
L/R: CH1+CH2
L: CH1 R:CH2
L/R: CH1+CH2+CH3+CH4
L: CH1+CH3 R: CH2+CH4
L/R: CH3+CH4
L: CH3 R: CH4
CH-2 - L/R: CH2 L/R: CH2+CH4 L/R: CH4
* In HDV format or 1080I CAMERA mode, you can only select the settings
within the bold frame.
e_hd200.book Page 62 Friday, February 1, 2008 4:04 PM
To Next Page
Loading...
