EasyManua.ls Logo

JVC GY-HD200U - 1080 I Recording

JVC GY-HD200U
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
69
1080i Recording
Connect the camcorder to DR-HD100 (HDD unit by FOCUS
enhancement) or other recorder to perform 1080i recording.
Connection diagram
Setting
SWITCH
IEEE1394 switch (LEFT SIDE) B HDV
MENU SCREENS
VIDEO FORMAT [1/2] Menu Screen
1080I CAMERA B ON
HDV PB OUTPUT B See Tables 1 and 2 below
Table 1 When recording camera images
T
When frame rate is set to “24”, 1080I CAMERA cannot be set.
Table 2 When playing back 1080i 60/50 HDV images
recorded on the DR-HD100 (Only with the GY-HD200U and
GY-HD201E)
OTHERS [2/2] Menu Screen
1394 REC TRIGGER
B When SYNCRO is set
Recording on DR-HD100 can be started/
stopped by using all the REC trigger buttons
on the camcorder.
B When SPLIT is set
Recording on the DR-HD100 can be started/
stopped by using only the REC trigger button
on the right side of the camcorder.
B When OFF, SERIES is set
Recording on DR-HD100 cannot be controlled
from the camcorder.
Time Code
When the DR-HD100 is set to TC EXT, set the TC
GENE. switch on the camcorder to FREE.
When the DR-HD100 is set to TC REC RUN, TC FREE
RUN or TC REGEN, the camcorder Time Code is not
recorded in the DR-HD100.
Operation
REC Start/Stop operation on the camcorder
The REC button on the camcorder controls the DR-HD100
recording.
Playback of the recorded files in the DR-HD100
Set the camcorder to VTR mode and DR-HD100 to Play-
back mode to playback recorded files of the DR-HD100 on
the camcorder.
(GY-HD200U/CHU,GY-HD201E/CHE ONLY)
Caution
Camera images cannot be recorded to tape with 1080I
CAMERA settings.
Video input through the IEEE1394 terminal cannot be
recorded to tape when camcorder is set to 1080I CAMERA.
The camcorder cannot play back 1080i recorded tapes,
recorded by other manufacturers.
The camcorder may not display video images from 1080i
camcorders of other manufacturers that are input through
the IEEE1394 terminal.
DNR (Digital Noise Reduction) is set to OFF when cam-
corder is set to 1080I CAMERA .
[1080I
CAMERA]
menu item
Frame
rate
Rec on
Tape
IEEE1394
Out
Component
Out
(EE Out)
Composite
Out
(EE Out)
HD ON
60 / 30 N / A 1080 / 60i 1080 / 60i 480 / 60i
50 / 25 N / A 1080 / 50i 1080 / 50i 576 / 50i
[1080I
CAMERA]
menu item
Rec on
Tap e
Component Out
Composite
Out
(EE Out)
[HDV PB OUTPUT] menu item
NATIVE
720P 1080I
NTSC
PAL
HD ON
1080 /
60i
N / A
1080 /
60i
N / A
1080
/ 60i
480 /
60i
N / A 480 / 60i
1080 /
50i
N / A
1080 /
50i
N / A
1080
/ 50i
N / A
576 /
50i
576 / 50i
MACRO
USER 3USER 2USER 1
STATUS
MENU
2
1
ND FILTER
REC
OFF
ON
POWER
WHT.BAL
AUTO
AUDIO
LEVEL
AUTO
CH-1 CH-2
VF BRIGHT
6P-6P
HDD Unit
DR-HD100
IEEE1394 Cable
V
IDEO
TC
DISPLAY
TC
UB
FREE
REGEN
GENE.
REC
M
RET
WT
A
MACRO
USER 3USER 2USER 1
STATUS
MENU
2
1
ND FILTER
REC
OFF
ON
POWER
WHT.BAL
AUTO
AUDIO
LEVEL
AUTO
CH-1 CH-2
VF BRIGHT
IEEE1394 Cable
HDD Unit
DR-HD100
REC button (1394 REC TRIGGER B SYNCRO)
REC button (1394 REC TRIGGER B SYNCRO or SPLIT)
VTR button (1394 REC TRIGGER B SYNCRO)
e_hd200.book Page 69 Friday, February 1, 2008 4:04 PM

Table of Contents

Related product manuals