Setting the Record Format Menu
1
Display the [Main Menu] B [Record
Format
] menu.
2
Set each of the items.
3
After setting is complete for all items, press
the [FOCUS ASSIST/1
] button.
0
The recording format is switched.
0
A “Please Wait...” message appears on the
screen during switching.
Zoom Operation
Adjusts the angle of view.
Zoom ratio: 1x to 23x (optical zoom only)
Zooming can be operated using any of the three
levers/rings below.
0
Zoom Lever at the Grip
0
Zoom Lever at the Handle
0
Zoom Ring at the Lens Section:
Functions as a zoom ring when the [
ZOOM
SERVO/MANUAL] switch is set to “MANUAL”.
.
W
T
REC
HOLD
REC
FIX VAR OFF
SERV O MANU AL
ZOOM
Using the Zoom Lever at the Grip
1
Set the [ZOOM SERVO/MANUAL] switch to
“SERVO
”.
2
Press the zoom lever to zoom.
0
The zoom speed changes according to the
extent the zoom lever is being pushed.
0
Zooms into wide angle and increases the
angle of view when “W” is pressed.
0
Zooms into telephoto and decreases the
angle of view when “T”
is pressed.
0
A zoom bar appears during zoom operation
.
Using the Zoom Lever at the Handle
1
Set the [ZOOM SERVO/MANUAL] switch to
“SERVO”.
2
Set the [FIX/VAR/OFF] zoom speed switch
to “FIX” or
“VAR”.
Memo :
0
Setting to “FIX” will allow the zoom operation to
move at
the speed set in [Handle Zoom Speed].
0
Set the zoom speed using
[
Main Menu] B
[Camera Function] B [Handle Zoom Speed].
(A
P99 [ Handle Zoom Speed ] )
0
Setting to “VAR
” will change the zoom speed
according to the pressure applied on the lever.
3
Press the zoom lever at the handle to zoom.
Memo :
0
When the
[FIX/VAR/OFF] zoom speed switch is
set to “OFF”, the zoom lever at the handle
section cannot be used.
48
Shooting
To Next Page
Loading...
