112
Camera Features
The marker and safety zone displays are useful in helping you determine the angle of view for the image according to the
shooting purpose.
䡵 Example of display when [Aspect Ratio] = A4:3B, [Aspect Marker] = ALine+HalftoneB, and [Center Mark] = AOnB
You can turn ON/OFF the safety zone and center mark displays as shown below using the [Aspect Ratio], [Safety Zone] and
[Center Mark] settings of [Marker Setting] in the [LCD/VF] menu. (A Page 90)
[Aspect Marker] Display
䡵 When [Aspect Ratio] = A4:3B
[Aspect Marker] Display for Different
[Aspect Ratio] Settings
䡵 When [Aspect Marker] = AHalftoneB
Marker and Safety Zone
Displays (Camera Mode
Only, Excluding AUX Mode)
Center Mark
Aspect Marker
Safety Zone
[Line] [Halftone] [Line+Halftone]
[4:3] [14:9] [16:9]/[16:9 (+4:3)] [2.35:1 Center] [2.35:1C.HeadRM]
[1.85:1 Center] [1.85:1C.HeadRM] [1.66:1] [1.75:1]
Downloaded From VideoCamera-Manual.com Manuals
To Next Page
Loading...
