27
Changing the Display Style
You can change the display style of the date/time on the
menu.
Memo :
● To perform the settings while looking at the monitor
screen connected to the video signal output terminal, set
[Analog Out Char.] or [SDI Out Char.] in the [A/V Out]
menu to AOnB. (A Page 92)
䡵 Setting the date style (Date Style) (A Page 91)
A
Select [LCD/VF] menu B [Status Display] menu B
[Date Style].
B Select the date display style.
[Setting values : YMD (year, month, day), MDY (month,
day, year), DMY (day, month, year)]
C Press the Set button (R).
䡵 Setting the time style (Time Style) (A Page 91)
A
Select [LCD/VF] menu B [Status Display] menu B
[Time Style].
B Select the time display style.
[Setting values : 12hour (12 hour display), 24hour (24
hour display)]
C Press the Set button (R).
Date/Time Display in Different Operation
Modes
The monitor speaker can be rotated 180 degrees.
Adjust according to the position of your ear.
Memo :
● Adjust the volume of the monitor speaker with the
[MONITOR] level adjustment knob at the side control
panel on the right of the camera recorder. Various warning
alarm tones may also be output repeatedly. (A Page 135)
Note :
●
The rotation angle of the monitor speaker is 180 degrees.
Do not over-rotate the monitor speaker.
During Camera mode Date/time of the built-in clock is
displayed.
During AUX mode
(U model)
During Media mode
(SD Card mode)
Shooting date/time of the clip being
played back is displayed.
During Media mode
(IEEE1394 mode)
Date/time is not displayed.
Adjusting the Monitor
Speaker
Monitor
Speaker
180 Degrees Rotation
[MONITOR] Level Adjustment Knob
Downloaded From VideoCamera-Manual.com Manuals
To Next Page
Loading...
