JVC GZ-E565 - Creating Discs with a DVD Writer; Preparing a DVD Writer (CU-VD3)

Creating Discs with a DVD Writer
You can copy the recorded files to discs or play back the created discs using
an optional DVD writer.
Compatible DVD Writers
Product Name Description
DVD Writer
0
CU-VD3
0
Enables the images recorded on this unit to be
copied to a DVD without using a PC.
http://www3.jvckenwood.com/dvmain/acc/cu-
vd3.html
DVD Writer
0
CU-VD50
0
Creates DVDs and functions as an external DVD
drive when connected to a PC. In addition,
created DVDs can be played back by connecting
the CU-VD50 to a TV.
http://www3.jvckenwood.com/dvmain/acc/cu-
vd50.html
Creating Discs with a DVD Writer
o
Preparing a DVD Writer
“Preparing a DVD Writer (CU-VD3)” (A p. 103)
“Preparing a DVD Writer (CU-VD50)” (A p. 104)
o
Copying to Discs
“Copying All Files” (A p. 105)
“Copying Files by Date” (A p. 106)
“Copying Selected Playlists” (A p. 107)
“Copying Selected Files” (A p. 108)
o
Other Operations
“Playing Back with a DVD Writer” (A p. 109)
Memo :
0
Discs created on this unit are saved in the AVCHD format.
Play back on an AVCHD compatible device (such as Blu-ray recorder). In
addition, discs in DVD-Video format cannot be created.
0
Images recorded in UXP mode cannot be copied to a DVD writer.
0
Videos in iFrame format cannot be backed up.
0
When there are many files to back up, it may take time for the backup to
be completed. Wait for a while as the access lamp appears blinking, which
indicates normal operation.
0
Date and time information as saved as subtitles in the created discs.
Preparing a DVD Writer (CU-VD3)
1
Remove the AC adapter and battery pack from this unit.
2
Open the LCD monitor.
.
3
Connect the USB cable and the AC adapter.
.
A Connect the USB cable of the DVD writer to this unit.
B Connect the AC adapter of the DVD writer.
0
Turn on the DVD writer.
C Connect the AC adapter to this unit.
0
This unit powers on automatically when the AC adapter is connected.
0
This unit turns on and the “BACK-UP” menu appears.
0
While the USB cable is connected, the “BACK-UP” menu is
displayed.
0
Refer also to the instruction manual of the DVD writer.
4
Insert a new disc.
.
A Press the eject button to open the disc tray.
B Pull out the tray completely and load a new disc properly.
C Push the disc tray in until it clicks into place.
Caution :
0
Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.
Copying
103