19
ENGLISH
CD OPERATIONS
Playing a CD
1
FUNC
1
Open the loading slot.
The display panel moves down, and the loading slot appears.
2
Insert a disc into the loading slot.
The unit draws a CD, the display panel moves up, and CD play starts
automatically.
Notes:
• When a CD is in the loading slot, selecting “CD” as the source by pressing FUNC starts CD play.
• When a CD is inserted upside down, “DISC EJECT” appears on the display and the CD automatically
ejects.
• When you play a CD Text, the disc title and performer appear on the display. Then the current track
and elapsed playing time appears on the display. See also “Playing a CD Text” (page 20) and “To
select the scroll mode” (page 34).
If a CD Text includes much text information, some may not appear on the display.
To stop play and eject the CD
Press OFF/0 briefly.
CD play stops, the display panel moves down, then the CD automatically ejects from the loading
slot.
• If you change the source, the CD play also stops (without ejecting the CD this time).
To close the display panel, press
¢ or 4 .
CAUTION: NEVER insert your finger between the display
panel and the unit, as it may get caught in the
unit.
Note:
If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into the
loading slot to protect it from dust. (CD play will not start this time.)
Current track
Elapsed
playing time
Total playing time of
the inserted disc
Total track number
of the inserted disc
EN19-23.KD-LX3R[E]/f 99.3.9, 6:14 PM19
To Next Page
Loading...
Need help?
General
