38
ENGLISH
Using the security lock
You can prohibit the unauthorized use of this unit by the others.
To use the security lock, you need to set the password first. Once you set the password, the
unit will ask you to enter the password when you turn on the unit for the first time after re-
installation (or after recovering the car battery exhaustion).
CAUTION: Be careful not to forget the password you have entered; otherwise, you cannot
use this unit. Keep the password in your mind and
more importantly on paper or some
other materials. You can write down your password in the spaces provided on the cover
page.
Registering the password
You have to use 4 characters for your password.
You can use the following characters: Capital letters (A – Z), small letters (a – z), and numerals
(0 –9).
1
Press and hold both buttons for more than 2
seconds.
The unit enters password entry mode.
2
Select the character set you want to use.
Each time you press the button, the character set changes as follows:
1 4, 5263, 5
Capital letters
Numerals
Small letters
EN35-40.KD-LX3R[E]/f 99.3.9, 6:15 PM38
To Next Page
Loading...
Need help?
General
