JVC KD-LX3R - DAB Tuner Operations; Storing DAB Services in Memory

50
ENGLISH
Storing DAB services in memory
You can preset up to 6 DAB services in each DAB band (DAB1, DAB2 and DAB3) manually.
1 3
2- 1
4- 1 4- 2
2- 2
5
1
Select the DAB tuner.
Each time you press the button, the source changes as described on
page 5.
2
Select the DAB band (DAB1, DAB2, or DAB3).
1 Press MODE.
“MODE” appears on the lower part of the display.
2 Press BAND to select the band number, while “MODE” is still on the
display.
Each time you press the button, the DAB band changes as follows:
3
Tune into an ensemble you want to store.
4
Select a service of the ensemble you want.
1 Press MODE.
“MODE” appears on the lower part of the display.
2 Press
¢ or 4 to select a service you want, while “MODE”
is still on the display.
1
2
D 1 D 2
D 3
(DAB 1) (DAB 2) (DAB 3)
1
2
EN48-52.KD-LX3R[E]/f 99.3.9, 6:16 PM50