JVC KD-LX3R User Manual

9
ENGLISH
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
1- 1
1- 3
1- 2
2
3
1 2
3
FM band number and “MEMO”
appears alternately for a while.
1
Select the FM1 band.
1 Press FUNC (Function) to select “FM” or
“AM.”
2 Press MODE.
3 Press BAND to select “FM1.”
2
Tune into a station of 88.3 MHz.
See page 6 to tune into a station.
3
Press and hold the number button (in this example, 1)
for more than 2 seconds.
4
Repeat the above procedure to store other stations into other
preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
EN06-10.KD-LX3R[E]/f 99.3.9, 6:14 PM9

JVC KD-LX3R Specifications

General

Brand	JVC
Model	KD-LX3R
Category	Car Receiver
Language	English