JVC KD-LX3R - Sound Adjustments; Storing Custom Sound Adjustments; Resetting Sound Settings to Factory Defaults

ENGLISH
27
Storing your own sound adjustments
You can adjust the sound control modes (BEAT, SOFT, POP: see page 26) to your preference
and store your own adjustments in memory.
2, 6 13, 54, 5
1
Light “MODE” on the lower part of the display.
The number buttons can work as different function buttons.
REMEMBER you must finish the following steps while “MODE”
is still on the display. Otherwise, the setting will be canceled.
2
Select the sound control mode (SCM) you want.
For details, see page 26.
3
Select the item you want to adjust (BASS, TREBLE,
or BBE).
4
Adjust the selected item.
5
Repeat steps 3 and 4 to adjust other items.
6
Press and hold SOUND.
Your adjustment made for the selected sound control mode is stored in
memory.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 26.
EN24-27.KD-LX3R[E]/f 99.3.9, 6:15 PM27