23
Menu Functions
Advanced
• Sharpness
Makes the picture look sharper or softer.
The higher the value, the sharper the
picture becomes. The lower the
value, the softer the picture becomes.
• Gamma
Gamma refers to the relationship between input source and picture brightness.
• 2.2: Normal gamma value.
• 1.8/2.0/2.4/2.6: The higher the value, the darker the picture.
This function is disabled under HDR mode.
• Picture Tone
You can also manually select a brightness level to display better picture quality.
When the value is higher, the image becomes brighter; when the value is lower,
the image becomes darker.
This function is only adjustable under HDR10 or HLG picture mode.
• BrilliantColor
Select the level of BrilliantColor from 2 to 10 in increments of 1. The default is
Off.
• Color Management
Provides six sets (RGBCMY) of colors to be adjusted. You can select any of them
to adjust its color range and saturation.
1. Press OK to display the Color Management window.
2. Select Primary Color and use / to select a color from R (Red), G
(Green), B (Blue), C (Cyan), M (Magenta), and Y (Yellow).
3. Press to select Hue and use / to set its range. Increase in the range
will include colors consisted of more proportions of its two adjacent colors.
The illustration shows how the colors relate to each
other.
For example, if you select R and set its range at 0,
only pure red is selected. Increasing its range will
include both the red color close to yellow and red
color close to magenta.
Submenu Functions and Descriptions
4712
Red
Yellow
Green
Cyan
Magenta
Blue
To Next Page
Loading...
Need help?
General
