JVC RX-230RBK - Page 25

RX-230RBK
Disassembly Procedures
1. Top cover removal 3. Front panel removal
1) Remove the 4 screws '‘A'fasing the both side. 1) Remove the top cover.
2) Remove the 2 screws 'B'fasing the rear side. 2) Pull up the main volume knob,and remove the Nut.
3) Remove the top cover 3) Remove the 3 screws 'B'fasing the top side.
4) Remove the 3 screws 'B'fasing the bottom side.
5) Remove the rear panel
Fig.2
2. Rear panel removal
1) Remove the top cover.
2) Remove the 3 screws ‘B'fasing the bottom
side.
3) Remove the 13 screws 'B'and screw 'C' fasing
the rear side.
4) Remove the rear panel
B
> ©
Main volume knob Nut
Fig.5
_d 4. Tuner PCB removal Fig.6
. ‘ 1) Remove the top cover.
| 2) Remove the Rear panel.
_ 3) Remove the 2 screws 'D'fasing the Tuner PCB.
)
*
4) Remove the Tuner PCB.
Fig.4
Fig.7
1-25