47
This screen sets the Auto Pan function that rotates slowly in a horizontal direction, the Auto Patrol function that moves the camera
to multiple positions in sequence, and the Auto Trace function that reproduces manual camera settings.
(● indicates the default value)
AUTO PAN/PATROL/TRACE
screen
Item Setting value Functions and settings
AUTO PAN SET..
^ This item sets the Auto Pan operation.
[Auto Pan setting] (A Page 66)
AUTO PAN MODE
● RETURN
RIGHT
LEFT
RETURN:Shuttles to and from the start and end positions
RIGHT : Right rotation
LEFT : Left rotation
AUTO PAN SPEED
LOW
● NORMAL
HIGH
This item sets the rotation speed during Auto Pan.
LOW : Low speed rotation
NORMAL : Normal rotation
HIGH : High speed rotation
A.PAN POS.SET..
^ This item sets the start and end positions for Auto Pan during the to-and-fro
shuttle.
AUTO PATROL SET..
^ This item sets the Auto Patrol operation.
[Auto Patrol Setting] (A Page 68)
Mode
● 1
2
3
Select the pattern of the Auto Patrol operation mode.
Position
This item sets the order of the patrolling positions.
The camera will auto-patrol in the order of the set positions.
Memo :
● When using Pelco protocol, patrol number item is APAT RO L1 t o PAT RO L 8 0B
and the setting value is changed to APOS1 to POS32, POS35 to POS82,
POS100 to POS256B.
PATROL1
● HOME
POS1 to POS99
PATROL2 to
PATROL100
HOME
●
POS1 to POS99
Time
SKIP
● 10s
20s
30s
45s
1min
2min
This item sets the duration the camera remains at one position.
AUTO TRACE SET..
^ This item sets the Auto Trace operation.
[Auto Trace Setting] (A Page 70)
To Next Page
Loading...
