53
Setting reverts back to default setting.
When the [SET] button is pressed, AFACTORY SETTINGS...B will be displayed for about 20 seconds. Then settings will revert
back to default settings.
After this is complete, ADATA CLEARDB will be displayed.
(● indicates the default value)
FACTORY SETTINGS
screen
Item Setting value Functions and settings
CANCEL
^ Does not return to the default setting. Press the [MENU] button or [SET] button
to return to the menu screen.
CLEAR(W/O
POS.TITLE)
^ Setting reverts back to default setting. However, setting data and titles for each
setting position and position will not return to the default setting. The screen
returns to the menu screen after the operation is completed.
CLEAR(ALL)
^ Returns all settings to default setting, including the titles and setting positions.
The screen returns to the menu screen after the operation is completed.
To Next Page
Loading...
