37
Recording from the Radio
Before recording....
Connect a recordable USB mass storage class device to the
USB MEMORY 2 (
) terminal. (See also page 6.)
1 Select the band (AM or FM).
2 Tune in to a station.
3 Activate the recording mode.
4 Select a group to record the broadcast into.
• If “FORM GRP” is selected, the System will
automatically create the new group. When you want
to create a new group, select “FORM GRP.”
• If you want to give a name to the new group before
recording, see also “To Give a Name to New Group”
on page 38.
5 Start recording.
To stop recording:
(on the main unit)
(on the main unit)
5 Start recording.
Both recording and playback start at the same time.
When playback ends, recording also stops.
• You cannot change the source while recording.
• If Program Play is activated and program is made (see
“Programming the Playing Order—Program Play” on
page 23), the tracks are recorded in the programmed
order.
To stop recording
manually:
To record the playing
track (1 track):
During play or pause...
(on the main unit)
Then, follow steps 4 and 5
on pages 36 and 37.
To record in analog
When digital recording is prohibited, you can record in
analog.
After step 2 of “Recording from a Disc”...
When the message is displayed, follow the step 3 and after.
4 sec
UX-G980V_U.indb 37UX-G980V_U.indb 37 08.9.11 3:28:12 PM08.9.11 3:28:12 PM
To Next Page
Loading...
Need help?
General
