8
Listening to the Radio
To select FM
To tune in to a station
While FM is selected...
Station searching starts and the frequency indication starts
changing continuously on the display.
When a station (frequency) with sufficient signal strength
is tuned in, the searching will stop.
To stop searching manually,
press either button.
• When you press the button repeatedly, the frequency
changes step by step.
If the received FM station is hard to listen
Reception will improve though stereo effect is lost.
To restore the stereo effect,
press the button repeatedly to
select FM.
To preset the stations
You can preset 20 FM stations.
1 Tune in to a station you want to preset.
2 Activate the preset number entry mode.
• Finish the following process while the indication on
the display is flashing.
3 Select a preset number for the station.
4 Store the station.
The PROGRAM indicator lights up on the display.
To tune in to a preset station
1 Select FM.
2 Select a number of the preset station.
FM ST
FM MONO
1 sec.
FM ST
FM MONO
To select a number, see “How
to select numbers” on page 7.
• You can also use
4 or x.
To select a number, see “How
to select numbers” on page 7.
• You can also use 4 or x.
The PROGRAM indicator
lights up on the display.
Remote
ONLY
FM ST
FM MONO
UX-TB30[B].BOOK Page 8 Tuesday, October 20, 2009 4:36 PM
To Next Page
Loading...
Need help?
General
