25
Specifications
Amplifier unit (AX-UXTB30)
Output Power: 20 W per channel, min. RMS,
driven into 6 Ω at 1 kHz with no
more than 10% total harmonic
distortion. (IEC268-3)
Speakers/Impedance: 6 Ω – 8 Ω
Player/tuner unit (XT-UXTB30)
Tuner section
FM tuning range: 87.50 MHz – 108.00 MHz
CD player section
Measurement Condition: 2W, IEC-A weighted
Dynamic range: 75 dB
Signal-to-noise ratio: 75 dB
Wow and flutter: Immeasurable
Terminals
AUDIO IN:
Input sensitivity/Impedance:
250 mV/50 kΩ
USB MEMORY:
USB specification: Compatible with USB 2.0 Full-
Speed
Compatible device: Mass storage class
Compatible system: FAT16, FAT32
Output power: DC 5 V 500 mA
General
Power requirement: AC 230 V , 50 Hz
Power consumption: 50 W (at operation)
1.00 W or less (on standby)
Dimensions (approx.):
Player/tuner unit: 230 mm × 81 mm × 230 mm
(W × H × D)
Amplifier unit: 230 mm × 81 mm × 243 mm
(W × H × D)
Mass (approx.):
Player/tuner unit: 1.70 kg
Amplifier unit: 2.94 kg
Speakers (SP-UXTB30)
Type: 2-way Bass reflex
Speaker units:
Tweeter: 4 cm cone × 1
Woofer: 10 cm cone × 1
Impedance: 6 Ω
Dimensions (approx.): 160 mm × 250 mm × 160 mm
(W × H × D)
Mass (approx.): 1.81 kg each
Supplied Accessories
See page 3.
Design and specifications are subject to change without
notice.
Body-UX-TB30[B].fm Page 25 Friday, October 23, 2009 9:46 AM
To Next Page
Loading...
Need help?
General
