JVL MAC00-EC41 - Page 12

12 JVL Industri Elektronik A/S - User Manual - Ethernet expansion modules for MAC motors
1.2 Module types
Changing the label and typenumber (only MAC products)
This illustration show how to apply the appropriate label in order to change the LED
texts and also give the module its unique typenumber after the protocol firmware is load
-
ed.
Changing the label and typenumber (only MIS/MIL products)
No changes need to be done at the MIS/MIL motors. The LED at the rear is universal.
Typenumber overview for MAC and MIS/MIL:
MAC Type MIS Type Ethernet Protocol
MAC00-EC4/-EC41 MIS/MILxxxxxxECxxxxx EtherCAT
MAC00-EI4/-EI41 MIS/MILxxxxxxEIxxxxx EtherNET / IP
MAC00-EL4/-EL41 MIS/MILxxxxxxELxxxxx EtherNet POWERLINK
MAC00-EM4/-EM41 MIS/MILxxxxxxEMxxxxx Modbus TCP
MAC00-EP4/-EP41 MIS/MILxxxxxxEPxxxxx Profinet IO
MAC00-ES4/-ES41 MIS/MILxxxxxxESxxxxx Sercos III
Only MAC
Sheet with type labels
for each Ethernet protocol
Peel off the relevant label from the sheet.
and place it in this area.
The existing typenumber and LED texts
will thereby be overwritten/replaced.
TT3040GB