JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors 145
6.2 Commissioning
19. It should now be possible to make a PLC application using cyclic communication to
the 8 registers input and output (see section 6.3.1 for setting up those with Mactalk).
There is also an example on the web page www.jvl.dk in the download section,
named 'JVL_PN_ex1.zip' which can be downloaded and unzipped. This example is
made for MAC140, but can easily be changed to work with MAC400-MAC4500 or
the MIS/MIL motors.
To Next Page
Loading...