JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors 189
8.2 Commisioning
Press the “Add devices” button and then the “Close” button. Then the motor (Drive)
should be added to the project, as shown below.
8.2.5.4 Jog the motor
Right click the master and select “Switch online”.
Then download the configuration to the Sercos
®
master by again right clicking the master
and then choose “Synchronize” and “Download motion configuration from PC to the
control”. Click “Yes” and “OK” to all pop-up windows that appear.
To Next Page
Loading...