190 JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors
8.2 Commisioning
Right click the “Motion” entry and select “Axis commissioning”. Press “OK” to the warn-
ing that pops up.
By pressing the “Login” button and answer “yes” to all pop-up windows, and then press-
ing the “BB” button for shifting to phase 4, the “Enable” button should become active.
Then pressing the “Enable” button should enable the drive (torque on) and then the jog
buttons and the other functions are active.
For making a PLC application and controlling the motor/drive this way, please consult the
controller manual.
To Next Page
Loading...