192 JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors
8.2 Commisioning
Press the “Add devices” button and find the FSPDrive profile xml file for the used motor
(MAC motor in this example), and then press the “Open” button. The SDDML is now
installed and the window can be closed.
8.2.6.3 Add MLC/XLC master to IndraWorks project
Make sure the PC with IndraWorks is connected to MLC master Ethernet port, and the
JVL MAC motor L/A IN port or the JVL MIS/MIL motor CN2 port is connected to the
MLC master Sercos
®
port, and that all devices are correctly powered. The PWR and the
L/A IN LED’s should be on if MAC motor is used. If a MIS/MIL motor is used then the
PWR and the L2 LED’s should be on.
Drag and drop the appropriate master from “library / Drive and control” to the project
in “Project explorer”.
To Next Page
Loading...