JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors 229
9.2 Register Descriptions.
Bit 8
Output mirror 0* = No output mirror
1 = Enable mirror of module outputs from motor error
register bit 30-31.
Bit 9
Input mirror 0* = No input mirror
1 = Enable mirror of module inputs to motor register 210
bit 2-5.
Bit 10
DHCP enable 0* = DHCP disabled.
1 = Enable of DHCP in module. Only applicable to Ethernet-
IP and ModbusTCP protocols.
* Factory default.
To Next Page
Loading...