42 JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors
3.3 Commisioning
6. The device should now appear in the left side of the TwinCAT window, with a tiny
JVL logo.
7. Press F4 (Reload I/O devices), and select the JVL device on the left side of the win-
dow.
8. The "L/A IN" LED at the MAC module or "L2" at the MIS/MILxxxxxxECxx motor
should now be flashing and the process data should now appear on the bottom right
side of the TwinCAT window.
9. By pressing the "CoE online" tab, it's possibly to inspect the CANopen objects, and
modify motor and module parameters.
10. If DSP402 drive profile is selected the JVL device is named "Drive" instead of "Box" as
shown in the picture.
To Next Page
Loading...