JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors 97
4.4 Commissioning
4.4.4 How to setup a Rockwell RSLogix5000 Project.
After creating a new project in the RSLogix5000 application the JVL motor must be add-
ed to the Ethernet bus-system in the project.
This is done by right clicking the “Ethernet-Module” icon in the project manager as illus-
trated below:
Select “New Module” and the following screen appears:
Expand the “Communications” - list.
To Next Page
Loading...