Kaba 1460 - Page 30

Commissioning User manual
30 k1evo809en-2014-04 Kaba programmer 1460
5.9.4 Overview of bootloader variants
The bootloader variants and differences for E300 (V4)
and V3 are shown in the following table.
Some actuators have INI reset contacts. Short-circuit
these contacts with electrically conductive tweezers
for approx. 10 seconds. To perform an INI reset, a mas-
ter medium or authorised user medium must also be
presented for some actuators (see table).
Actuators Tweezers DIP switches
c-lever  x
c-lever compact

5
x
Digital cylinder

5
x
Remote reader
x
7

6
Compact reader
x
7

6
Key:
5
Present master medium or authorised user medium
(Difference: Before the INI reset for V4 or during the INI reset for V3.)
6
Turn DIP switches 5+6 ON
7
Not for online actuators