15
USER ACCESS CODES (PINs) - EXAMPLES
Master Code User Code Length Sample User Codes
Acceptable Unacceptable
00004992 4 digits 1000 0000
0005
1206
0001
00004992 5 digits 32000 00004
00006
00100
00044
00004992 6 digits 001041 000049
000046
400492
000048
00004992 7 digits 0005521 0000499
2000499
9900872
1000892
00004992 8 digits 80009765 00004992
12006654
00004993
40004992
PROCEDURE 1 - ADD / MODIFY A USER ACCESS CODE
• When users no longer need access to the lock, delete the User Code by
deleting the corresponding user ID location. This permits you to use the
deleted user ID location for a new user.
• If you only de-activate the old code, you cannot add a user with the same
number. De-activate should only be used when the User is, for example, on
vacation, and his number will be re-activated when he returns.
• A User ID location is a 3-digit number assigned by the Master or Manager.
You should have the list of User ID locations with you when programming
locks. You should always maintain an accurate and correct list of User ID
locations and users assigned to those ID locations.
To Next Page
Loading...
Need help?
General