30
Summary of Pushbutton Programming Commands
Name Command Description of Command Authorization
Configure
000 #
MMMMMMMM#
MMMMMMMM#
‘Modify Master User Access Code (lock’s
activation)’ (Always 8 digits)
Master
001 #
MMDDYY#
MMDDYY#
‘Date setup’ (MM = 01 to 12; DD = 01 to 31;
YY = 00 to 99)
Master
002 #
HHMM#
HHMM#
‘Time setup’ (HH = 00 to 23; MM =
00 to 59)
Master
003 #
NNNN#
‘Lock ID setup’ (NNNN = 0000 to 9999) Master
004 #
TT#
‘Unlock time setup’ (TT = 02 to 20 seconds) Master, Mgr
005 #
TT#
‘Passage Mode Timeout setup’ (TT = 01 to
24 hours - duration time in hours; 00 = no
time limit)
Master, Mgr
006 #
TT#
‘Tamper time setup’ (TT = 00 to 90 seconds) Master, Mgr
007 #
TT#
‘Tamper wrong try setup’ (TT = 03 to 09) Master, Mgr
008 #
VV#
‘Buzzer volume control’ (VV = 00 to 03; 00
= off; 01 = Low; 02 = Normal; 03 = High)
Master, Mgr
009 #
LL#
‘Modify access length’ (LL = 04 to 08 digits) Master
099 # ‘Reset to factory default values’, except
access code length. (Master, manager,
access user and time/date are retained if
already programmed. Users are not reset.)
Master
To Next Page
Loading...
