Kaba E-Plex 50 Series - Page 31

31
Summary of Pushbutton Programming Commands
Name Command Description of Command
Add/Modify
Users
100 #
NNN #
UUUU {UUUU}#
UUUU {UUUU}#
‘Add/Modify User Access Code’ NNN
= specific User ID location (001 to 299)
(Combination length can be 4 to 8 digits,
depending on access length LL setting)
Master, Mgr
101 #
NNN #
UUUU {UUUU}#
UUUU {UUUU}#
‘Add/Modify Manager Access Code’ NNN
= specific User ID location (001 to 299)
(Combination length can be 4 to 8 digits,
depending on access length LL setting)
Master
102 #
NNN #
UUUU {UUUU}#
UUUU {UUUU}#
HH#
‘Add/Modify Service User Access Code’ NNN
= specific User ID location (001 to 299) (HH
= 01 to 24 hours - duration time in hours;
00 = one-time entry; Combination length
can be 4 to 8 digits, depending on access
length LL setting)
Master, Mgr
103 #
UUUU {UUUU}#
UUUU {UUUU}#
‘Modify M-Unit User Code’ (Combination
length can be 4 to 8 digits, depending on
access length LL setting)
Master, Mgr
Delete
Users
200 #
NNN#
‘Delete User Access Code’ Master, Mgr
201 #
NNN#
‘Delete Manager Access Code’ Master
202 #
NNN#
‘Delete Service User Access Code’ Master, Mgr
299 # ‘Delete all User Access Codes’ (except
Master, Manager and M-Unit User)
Master, Mgr