Kaba E-Plex 50 Series User Manual

5
Default values of the E-Plex
®
Lock programmable parameters
Parameters Factory Default Values
Date (MM/DD/YY) 01/01/00
Time (HH:MM) 00:00
Lock state Unprogrammed
Lock ID 0000
Passage mode open time limit 9 hours
Passage mode Disabled
Lockout mode Disabled
Unlock time 2 seconds
Buzzer volume control Low
Tamper shutdown time 30 seconds
Tamper attempt count 4 attempts
Access code length 4 digits
Latch Holdback Mode Disabled (E-30xx only)
Swingbolt Privilege Disabled (E-30xx only)
Privacy Privilege Disabled (E-50xx only)
Master combination 12345678 (8 digits)
Access code None
Code status Activated
M-Unit user’s combination None
M-Unit user’s status Disabled
Configuring the Lock
General Procedure for Pushbutton Programming
1. The pages that follow provide step-by-step instructions for programming
the E-Plex Lock.

Kaba E-Plex 50 Series Specifications

General

Brand	Kaba
Model	E-Plex 50 Series
Category	Locks
Language	English