2
TABLE OF CONTENTS
States of the Lock .............................................. 4
Factory Mode 4
Access Mode 4
Pushbutton Programming Mode ..................................... 5
Sequence of Operations for Start-Up Programming .................. 4
Default Values of the E-Plex
™
Lock Programmable Parameters ............. 5
Configuring the Lock .............................................5
General Procedure for Pushbutton Programming ..................... 5
Reset Procedures ................................................. 6
Procedure 1 - Program the Access Code Length ....................... 9
Procedure 2 - Modify the Master User Access Code ...................10
Procedure 3 - Set the Date / Time ...................................10
Procedure 4 - Program the Lock ID and Unlock Time .................. 11
Procedure 5 - Program the Duration of the ........................... 11
Passage Mode Period
Procedure 6 - Program the Lock for Tamper .........................12
Time Parameters
Procedure 7 - Programming the Lock for Keypad .....................13
Buzzer Volume
Users - General Information ........................................13
User Levels 14
User Codes 13
User Access Codes (PINs) - Examples ................................14
Procedure 1 - Add / Modify a User Access Code .......................15
Procedure 2 - Add / Modify a Manager Access Code ...................16
Procedure 3 - Add / Modify Service User Access Code .................17
Procedure 4 - Delete User Access Codes .............................17
Procedure 5 - Delete Manager Access Codes ........................22
Procedure 6 - Delete Service User Access Codes ..................... 22
Procedure 7 - Delete All Access Codes Except Master, ................ 22
Manager, and M-Unit
Procedure 8 - Activate User Access Codes .......................... 23
Procedure 9 - Activate Manager Access Code ........................ 23
Procedure 10 - Activate Service User Access Code ...................24
To Next Page
Loading...
