29
Warning: Ensure that you relock the door (engage the swingbolt) when not needed;
otherwise the lock will stay unlocked permanently compromising security
.
4. You can also engage the swingbolt using the mechanical override key by
performing the following operation and the procedure is almost the same as
in Step 2. above. Insert the mechanical key in the lock override cylinder’s
vertical slit and turn it clockwise to the horizontal position. With the key
still in this horizontal position, turn the thumbturn clockwise to engage the
swingbolt which will revert back up to its locked, horizontal (home) position.
Let go off the thumbturn so that it will also revert back to its normal horizontal
(home) position. Turn the key back to its vertical position and remove it from
the lock cylinder.
To Next Page
Loading...
Need help?
General