EasyManua.ls Logo

Kaba E-Plex 5000 - Activate;De-activate Lockout Mode; Lockout Mode Management; Perform Manual Diagnostics; Lock Diagnostic Procedure

Kaba E-Plex 5000
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Procedure 9 - Activate Manager Access Code
A Manager Code should be activated if it has been de-activated for a
certain time period - during a Manager’s vacation, for example, or if you
created a Manager’s Code, but never assigned it to anyone.
Required User Level: Master
1. Put the lock into Pushbutton Programming Mode.
2. Enter Command 301# to activate a Manager Access Code.
3. Enter the ID location NNN#, where NNN is the specific User ID
location, 024 for example.
4. Example of Complete Entry: 301#024#.
5. Enter another # to indicate the end of programming.
6. The Manager Access Code will now work in that door with all the
access privileges assigned to a Manager User.
Procedure 10 - Activate Service User Access Code
A Service User Access Code should be activated if it has been de-
activated for a certain time period - during a Service User’s vacation, for
example, or if you created an Access Code but never assigned it to a
Service User.
Required User Level: Master, Manager
1. Put the lock into Pushbutton Programming Mode.
2. Enter Command 302# for Service User Functional Code.
3. Enter the ID location NNN#, where NNN is the specific User ID
location, 025 for example.
4. Example of Complete Entry: 302#025#.
5. Enter another # to indicate the end of programming.
6. You have now activated a Service User Access Code.

Table of Contents

Related product manuals