2
TABLE OF CONTENTS
Sequence of Operations for Start-Up Programming 4
States of the Lock 4
Factory Mode 4
Access Mode 4
Pushbutton Programming Mode 5
Default Values of the E-Plex
™
5000 Programmable Parameters 5
Configuring the Lock 6
General Procedure for Pushbutton Programming 6
Reset Procedures 7
Procedure 1 - Program the Access Code Length 7
Procedure 2 - Modify the Master User Access Code 8
Procedure 3 - Set the Date / Time 8-9
Procedure 4 - Program the Lock ID and Unlock Time 9
Procedure 5 - Program the Duration of the 10
Passage Mode Period
Procedure 6 - Program the Lock for Tamper 10-11
Time Parameters
Procedure 7 - Programming the Lock for Keypad 11-12
Buzzer Volume
Users - General Information 12
User Levels 13
User Codes 14
User Access Codes (PINs) - Examples 14
Procedure 1 - Add / Modify a User Access Code 15
Procedure 2 - Add / Modify a Manager Access Code 16
Procedure 3 - Add / Modify Service User Access Code 16-17
Procedure 4 - Delete User Access Codes 17
Procedure 5 - Delete Manager Access Codes 18
Procedure 6 -
Delete Service User
Access Codes
18
Procedure 7 - Delete All Access Codes Except Master, 19
Manager, and M-Unit
Procedure 8 -
Activate User
Access Codes 19
Procedure 9 -
Activate Manager
Access Code 20
To Next Page
Loading...
