25
8. Try the Diagnostic Code again, 500#1234567890*#, to be sure
you entered all the numbers correctly and in the correct order.
9. Enter another
# to indicate the end of programming.
10. If you still see the red LED, the lock has a problem. Call a
service person to repair or replace the lock.
Battery Life and Replacement
A variety of factors (shelf life, openings per day, environment, battery
brand, lock settings, etc.) will determine how long your lock operates
on a set of batteries. In average conditions, you can expect up to
180,000 openings for E-Plex 5031 models (4 “AA” Alkaline Batteries).
A Low Battery condition is identified by a flash of both red and green
LEDs when a valid access code is entered. When the low battery
condition is observed, the batteries should be replaced as soon as
possible.
To Next Page
Loading...
Need help?
General