Kaco blueplanet 3.0 NX3 M2 User Manual

Page 37 KACO blueplanet 3.0 NX3 M2 KACO blueplanet 5.0 NX3 M2 KACO blueplanet 8.0 NX3 M2 KACO blueplanet 10.0 NX3 M2
KACO blueplanet 15.0 NX3 M2 KACO blueplanet 20.0 NX3 M2
9.8.4 Resetting a faulty connection

<Communication unit> is open.
Note: The communication unit is restarted
via the <Restart communication unit> icon.
Set values on the device are not reset.
1. Press the <Confirm> button in the
warning message to trigger a restart.
Important: Pressing <Reset
communication unit> resets all created
configurations to the factory defaults.
2. Reset the communication unit with
<Reset communication unit>.
» Check the connection after restart.
Fig. 72. Note for <Restart communication unit>
All configurations remain unchanged.
Fig. 73. Reset / restart the
communication unit
Fig. 74. Observe the note on
resetting the communication
unit!
NOTE
The following settings are reset when the communication unit is reset:
• Network configurations
• Feedin and Smart-Meter Settings
• Function Monitoring & Control
• Time Zone
• Internal inverter list from the communication unit is deleted from the memory.
Note: Inverter settings are not reset by the communication unit during a restart.

Kaco blueplanet 3.0 NX3 M2 Specifications

General

Brand	Kaco
Model	blueplanet 3.0 NX3 M2
Category	Inverter
Language	English