Name: Kaco blueplanet 3.0 NX3 M2
Brand: Kaco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

KACO blueplanet 3.0 NX3 M2 KACO blueplanet 5.0 NX3 M2 KACO blueplanet 8.0 NX3 M2 KACO blueplanet 10.0 NX3 M2

KACO blueplanet 15.0 NX3 M2 KACO blueplanet 20.0 NX3 M2 Page 32

9.7 Menu of the communication unit

Note: In both cases you now have access to the communication unit.

This is where you can make settings that do not directly affect the function of the

inverter.

Note: Observe the step-by-step procedure for initial commissioning in chapter 9.2

on Page 25

Note: After completing or exiting initial start-up, the serial-number-based password

is required to set further parameters. See Chapter 9.11.6 on page 36.

Fig. 53. Menu of the communication

unit

9.7.1 Setting the time zone

Note: The time communicated by the

network is GMT. You should now adjust the

time zone depending on the installation

location.

This time is also used for the display on the

“blueplanet web” portal.

1. Select time zone. For Germany, this

would be: Amsterdam, Berlin…

2. Confirm the selection with <OK>.

Note: If the internet is not available on the

network, you will have to make the

changeover to summer/winter time

manually.

» Timezone set.

Fig. 54. Menu of the

communication unit

Fig. 55. Set Time Zone

Kaco blueplanet 3.0 NX3 M2 User Manual

Other manuals for Kaco blueplanet 3.0 NX3 M2