Need help?Do you have a question about the Kampmann KaControl and is the answer not in the manual?
General| Brand | Kampmann |
|---|---|
| Model | KaControl |
| Category | Controller |
| Language | English |
Specifies approved indoor applications for KaControllers and door air curtains.
Highlights the need for qualified personnel for installation and maintenance.
Details crucial safety warnings, electrical precautions, and VDE guidelines.
Warns against unauthorized modifications and work not described in the manual.
Lists key functionalities like LCD display, timer, and bus connection.
Explains the purpose and layout of the device's buttons.
Details the meaning of various symbols displayed on the KaController screen.
Describes navigation using the dial for various settings.
Provides methods for powering the KaController on and off.
Covers setting fan speed stages.
Guides on setting the current time and date.
Guides on setting daily switching on/off times using timer programs.
Explains how to set and change operating modes (e.g., Summer/Winter).
Lists codes and descriptions for door air curtain faults.
Lists fault codes for the KaController's internal electronics.
Details motor fault indications and troubleshooting steps.
Specifies rules for laying shielded and paired BUS cables correctly.
Illustrates connecting up to six door air curtains in a single control circuit.
Details wiring the KaController as a master unit in a control circuit.
Explains how to connect external devices like thermostats to the master unit.
Guides on connecting electrical cables to door air curtains.
Details the process of installing and removing the KaController unit.
Shows the terminal connections for the KaController.
Illustrates the setting of DIP switches on the KaController.
Discusses addressing and configuration for up to 6 units in a control zone.
Explains how to set unit configuration using DIP switches on the PCB.
Describes the default system configuration and its functional description.
Details system 2 configuration using an external thermostat for mode changeover.
Explains system 3 configuration involving room temperature sensing and control.
Describes system 4 with external thermostat and room temperature sensor inputs.
Details system 5 with additional frost protection sensor and temperature control.
Outlines configuring system requirements via parameter settings in the Service menu.
Guides on accessing the Service menu for parameter adjustments.
Covers parameters for displaying setpoint temperature and room temperature.
Explains parameters for locking functions to optimize operation and energy use.
Details setting maximum fan speed via parameter P50 or potentiometer.
Covers setting the minimum fan speed using parameter P51.
Explains how to lock individual fan stages using parameter P42.
Details using parameters P58, P61, P62 to calibrate sensors.
Describes setting the function of multifunctional input Al1 using parameter P15.
Describes setting the function of multifunctional input Al2 using parameter P16.
Describes setting the function of multifunctional input Al3 using parameter P17.
Explains setting the function of digital input DI1 using parameter P43.
Explains setting the function of digital input DI2 using parameter P44.
Covers locking individual operating options or functions using parameter P38.
Details how to copy setup using the programming key to other circuit boards.
Explains how special user requirements are set via parameters.
Guides on accessing and setting parameters within the KaController menu.
Provides a comprehensive list of KaController parameters with their functions.
To Next Page
