KaControl for Door Air Curtains
INSTALLATION AND OPERATING INSTRUCTIONS
11
Door air curtains 1.96
3.2.2 Fan Setting
Press the FAN key (quick access) or use the navigator dial to call up
the "Fan setting" selection menu.
Calling up the "Fan setting" menu using the navigator:
The room temperature is initially controlled with natural convection
in Automatic mode and then by continually adjusting the fan speed.
Users also have the option of setting the fan stages Auto-0-1-2-3-4-5
as required.
Pressing the navigator dial in standard view switches the display to
the "Fan setting" menu.
You can select the required fan stage Auto-0-1-2-3-4-5- by turning
the navigator.
Pressing the navigator activates the selected fan stage.
If no action is carried out using the navigator for longer than
3 seconds, the last change made is saved and the standard view is
called up.
Fan stage 3
To Next Page
Loading...
