EasyManua.ls Logo

Kamstrup MULTICAL 403 - Mounting of Temperature Sensors; Short Direct Sensor (DS) Installation

Kamstrup MULTICAL 403
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
411d
Reading
Tel: +44 (0)118 9311188 | Email: info@able.co.uk
Aberdeen
Tel: +44 (0)1224 725999 | Email: ab@able.co.uk
Registered Address
ABLE Instruments & Controls Ltd
Cutbush Park, Danehill, Lower Earley,
Reading, Berkshire, RG6 4UT. UK.
Web
able.co.uk
E-commerce
247able.com
4 Kamstrup A/S 55121739_A3_GB_04.2016
MULTICAL® 403
1 General information
Please read this guide carefully before mounting the energy meter.
In case of incorrect mounting, Kamstrup's guarantee obligations no longer apply.
Please note that the following installation conditions must be obeyed:
- Pressure stage: PN16/PN25, see marking. The meter marking does not apply
to enclosed accessories.
- Pressure stage, Kamstrup
sensor pair type DS: PN16
- Pressure stage, Kamstrup
pocket sensors type PL: PN25
At medium temperatures above 90 °C we recommend flange sensors as well as wall-mounting of
calculator.
At medium temperatures below ambient temperature, MULTICAL® 403 must be wall mounted and
the condensation-proof version, type 403-T, must be used.

Other manuals for Kamstrup MULTICAL 403

Related product manuals