Kamstrup MULTICAL 601 User Manual

8
4.4 Installation examples
Threaded meter with MULTICAL®/Pulse Transmitter mounted on ULTRAFLOW®.
Flange meter with MULTICAL®/Pulse Transmitter mounted on ULTRAFLOW®.
4.4.1 Humidity and condensation
When installed in humid environments ULTRAFLOW® must be turned 45° in
relation to the pipe axis as shown below.
Flow from the left Flow from the right
Flow from the left Flow from the right
By means of the angle bracket MULTICAL®
can be mounted in two positions.
Angle bracket type 3026-252 must
be ordered separately.
101
90
91
27
45°
81
63
45°
If condensation is likely, e.g. in cooling
systems, an ULTRAFLOW® which is protected
against condensation must be used.

Kamstrup MULTICAL 601 Specifications

General

Brand	Kamstrup
Model	MULTICAL 601
Category	Measuring Instruments
Language	English